When you’re fortunate sufficient to seek out hardwood flooring hiding underneath your drained carpeting, you would possibly really feel like overlaying the wooden again up. That is comprehensible as a result of refinishing the flooring your self looks as if an inconceivable job.Hardwood flooring have been a standard function in homes till the 1960s. Earlier than that, having wall-to-wall carpet was thought of a luxurious improve. From the 1970s on, most houses had wall-to-wall carpet in practically each room. Nevertheless, tastes change, and during the last couple many years, hardwood flooring have as soon as once more grow to be modern and fascinating. Oftentimes, once I’m speaking with somebody about fixing homes, they ask if refinishing hardwood flooring is one thing they’ll do themselves. Except the individual has a bodily motive why they cannot do it, I typically say sure. Nevertheless, I additionally remind them that redoing hardwood flooring takes an excessive amount of time, sweat, and elbow grease.
As a normal rule, flooring of fifty sq. toes or much less may be sanded by hand, however for any ground bigger than that, lease or purchase a small orbital sander. The whole lot vital for doing it your self might be out there at your native ironmongery shop. You should buy a fairly good electrical sander these days for lower than $100, which is usually a good funding, particularly when you’re planning to work on your property regularly.The primary layer to be eliminated is usually a thick wax coating, adopted by a coat of both polyurethane or varnish. A heavy obligation industrial wax stripper can take away the wax, after which a lacquer thinner or acetone may be wiped on to arrange the wooden for the subsequent step. If there are any carpet tacks or items of outdated nails within the wooden, take away them first. The remnant of a nail can tear up sandpaper, harm a sanding pad, and do critical harm to the palm of your hand, so examine rigorously to verify all remnants of tacks and nails are gone earlier than you start sanding. Fill all nail holes with a top quality wooden filler, matching the colour as intently as you’ll be able to, and let it dry. You then’re prepared to start sanding the ground with 220-grit sandpaper, whether or not by hand or with a sander. Once you’re performed sanding, wipe the complete ground with a moist fabric to take away as a lot sanding mud as doable. Damp cloths work higher than vacuum cleaners. Let the ground dry, after which wipe it once more with a tack rag, which is a fabric impregnated with resin to choose up positive mud particles. Once more, your native ironmongery shop may have what you want.After the ground is as clear as you will get it, apply three coats of polyurethane with a paint pad, permitting every coat to dry completely, calmly sanding with 220-grit paper, and wiping the ground with a moist fabric and a tack rag between coats. When you choose an old school end, you need to use a 50/50 combination of linseed oil and mineral spirits after which wax the flooring with beeswax or paste wax. Take warning with the chemical combination and the rags as a result of they’ll catch on hearth.
You’ll be able to refinish hardwood flooring your self. It simply takes time and effort–and set of kneepads would not damage, both! When you end, you will have a stunning ground to be happy with and prepared for that subsequent “do it your self” project–perhaps the subsequent room with hardwood flooring.